Table of Contents
Advertisement
AV-Link Function of this VCR
If your TV has "Easy Link / nexTViewLink / AV-Link" function, the VCR can automatically store stations
memorized in the TV in the same channel position as those of the TV.
Using a SCART cable (21 pins), a mutual control is available with the TV, VCR, SAT receiver, etc.
The VCR automatically stores all your current TV stations in the VCR in the same position order as the
TV channels. ("TV CH DOWNLOAD")
Even if the TV is in standby mode, the TV automatically turns on and displays the video picture when
you start playback on the VCR.
The VCR automatically selects the same picture as you are watching on the TV, and record it. ("TV
PICTURE")
The VCR takes in the data and turns to timer standby mode, after a program data reserved is
transferred to the VCR by a TV using such as a EPG (Electronic Program Guide). In this case, the TV's
and the VCR's channel position must be set to the same TV station. The position could be stored from
1 to 80. Also the VCR's clock must be set.
Connection
Connect your EasyLink / nexTViewLink / AV-Link TV to the AV1 (EURO AV) socket on the rear of the VCR using the
SCART cable. Refer to your TV's manual additionally.
- Connection to your EasyLink / nexTViewLink / AV-Link TV
TV
AERIAL IN
AUDIO/VIDEO
AERIAL OUTPUT
IN/OUT (SCART)
When connecting another VCR supporting EasyLink / nexTViewLink / AV-Link functions
The "AV-LINK" system can connect 2 VCRs (VCR1 and VCR2) at the same time. This VCR is adjusted to
"VCR1", so it should be connected to VCR2.
TV
VCR2
SCART cable
SCART cable
- Connection to your EasyLink / nexTViewLink / AV-Link TV and a satellite receiver
AERIAL INPUT
Satellite antenna
AERIAL OUTPUT
TV
AERIAL INPUT
AUDIO/VIDEO
AERIAL IN
21 pins
SCART cable
IN/OUT(SCART)
42
AERIAL INPUT
AV2 (DEC./EXT.)
OUT/SORTIE
R/D
TV
AUDIO
L/G
AV1 (EURO AV)
SCART Cable
this VCR
VCR1
IN/OUT(SCART)
SCART cable
SATELLITE IN
AV2 (DEC./EXT.)
OUT/SORTIE
R/D
TV
AUDIO
L/G
AV1 (EURO AV)
TV programme Download
Preparation:
Turn on the TV.
Select the video channel or the video input mode on the
TV.
1
Press the MENU on the remote control.
Result:
The programming menu is displayed.
2
or ➛, ❿ buttons to select the
Press the corresponding
,
$
❷
INSTALLATION
option.
And then press the OK button to select this option.
Result:
The
INSTALLATION
menu is displayed.
3
Press the
or
buttons to select
AV-LINK SETTING
$
❷
And then press the ❿!button to select this option.
Result:
The
menu is displayed.
AV-LINK SETTING
4
Press the
or
buttons, until the
TV CH DOWNLOAD
$
❷
selected.
And then press the ❿ button to select this option.
5
Press the ❿ button to start
TV CH DOWNLOAD
function.
6
When the downloading finished, then "
TV CH DOWNLOAD
FINISHED
" is displayed.
7
Press the MENU button to exit.
The available position numbers on the VCR are 1 to 80.
When the TV's channel position is readjusted, the
VCR automatically makes "TV CH DOWNLOAD".
MENU
1
OK
PROG
OPTIONS
INSTALL
INSTALL
option.
CLOCK
BONUS
LANG
INSTALLATION
option is
➛❿!!
OK
END:
MENU
$ ❷!!
INSTALL
AUTO SET UP
MANUAL SET UP
AV-LINK SETTING
TV SYSTEM
:G
VCR OUTPUT CH
:CH36
❿
END:
MENU
$ ❷
** AV-LINK **
TV CH DOWNLOAD
TV PICTURE RECORD :OFF
❿
END:
MENU
$ ❷
TV CH DOWNLOAD
0%
I --------------- I
START:
❿
END:MENU
43
GB
Advertisement
Table of Contents
