Samsung SV-2303X Instruction Manual

Samsung cassette recorder instruction manual.
Hide thumbs
VIDEO
CASSETTE RECORDER
SV-6333X
SV-6332X
SV-2333X
SV-2303X
Instruction Manual
www.samsungvcr.com
PAL

   Also See for Samsung SV-2303X

   Related Manuals for Samsung SV-2303X

   Summary of Contents for Samsung SV-2303X

  • Page 1

    VIDEO CASSETTE RECORDER SV-6333X SV-6332X SV-2333X SV-2303X Instruction Manual www.samsungvcr.com...

  • Page 2: Table Of Contents

    VCR’s features. The instructions in this manual are for models, SV-6333X, SV-6332X, SV-2333X and SV-2303X. Before you start reading this manual please check your model number. It is displayed on the rear of the VCR. (SV-6333X): Exceptions only for a certain model, for example SV-6333X.

  • Page 3

    Intelligent Picture Control ... FORMAT 16:9 (WIDE SCREEN) (SV-6333X/SV-2333X) ... Selecting the Colour Mode ... Selecting the Audio Output Mode (SV-6333X/SV-6332X)... Selecting the Audio Mute Mode (SV-2333X/SV-2303X) ... EARCHING FOR A EQUENCE Playing a Cassette in Slow Motion ... Playing a Sequence Frame by Frame ...

  • Page 4: Rear View Of The Vcr, Infrared Remote Control

    Front View of the VCR (SV-6333X/SV-6332X/SV-2303X) STANDBY/ON VIDEO CASSETTE EJECT RECORD BUTTON REW BUTTON F.F BUTTON COMPARTMENT BUTTON BUTTON EJECT STANDBY/ON PROG STOP PROGRAM SELECTION STOP BUTTONS BUTTON (SV-2333X) STANDBY/ON VIDEO CASSETTE RECORD BUTTON COMPARTMENT BUTTON BUTTON EJECT BUTTON STANDBY/ON...

  • Page 5: Display Indicator, Accessories

    Audio output Rear AUDIO (SV-6333X/SV-6332X only) Whenever you connect an audio or video system to your VCR, ensure that all elements are switched off. Refer to the documentation supplied with your equipment for detailed connection instructions and associated safety precautions.

  • Page 6: Connecting Your Vcr To The Tv Using The Coaxial Cable

    Plug the other end into the appropriate connector on the television. Plug the RCA Audio cable with stereo system into the Audio out socket on the rear of the VCR. (SV-6333X/SV-6332X only) Connecting a Decoder for scrambled PAY TV broadcasts...

  • Page 7: Connecting Your Vcr To The Satellite Receiver Or Other Equipment, Plug & Auto Set Up

    2. By means of RF Coaxial Cable After making this connection, you must preset the station received through the satellite tuner. RF output channel of the satellite receiver should be adjusted away from channel 36, which is used by the VCR, e.g. re-adjust to channel 33.

  • Page 8: Tuning Your Television For The Vcr

    Tuning Your Television for the VCR You must tune your television for the VCR only if you are not using a Scart cable To view pictures from your VCR when a Scart cable is used, the television must be set to the audio/video mode (AV).

  • Page 9: Setting The Date And Time

    Sichern Sie nicht vollständig entladene Akkus gegen Kurzschlüsse. Setting the Date and Time Your VCR contains a 24-hour clock and calendar used to: Automatically stop programme recording Preset your VCR to record a programme automatically You must set the date and time when:...

  • Page 10: Displaying/hiding On-screen Information, Choosing Your Language, Setting The Vcr Output Channel

    MENU Setting the VCR Output Channel Your VCR output channel may need to be changed if the pictures suffer from interference or if your TV cannot find the pictures. Also, you can change the VCR output channel to adjust the frequency in which information is displayed on the screen.

  • Page 11: Presetting The Stations Automatically, Presetting The Stations Manually

    You can store up to 99 stations. ➛❿!! BEENDEN: MENU " ❷!! To enable the VCR to decode a scrambled TV station, the decoder must be activated after the scan (see pages 19 or 21). (SV-6333X/SV-2333X Only) LÄNDERWAHL BELGIQUE ÖSTERREICH Press the MENU button on the remote control.

  • Page 12: Clearing A Preset Station, Changing The Preset Station Table

    SORT.:OK " ❷ LÖSCHEN:CLR/RST MENU Press the corresponding " placed in front of the required preset TV station. (PR) (SV-6332X/SV-2303X) Press the CLR/RST button. Repeat the same procedure from Step ** SENDER-TABELLE ** required stations have been cleared. NAME ❿...

  • Page 13: Selecting The Cassette Type

    ❷) buttons on your television to select the channels. To switch the VCR indicator on and off, simply press the TV/VCR button. Selecting the Cassette Type If you wish to use the tape counter to display the time remaining on a cassette, you must indicate the type of cassette inserted.

  • Page 14: Protecting A Recorded Cassette, Recording A Programme Immediately, Recording A Programme With Automatic Stop

    Switch on the television. CLR/RST F.ADV To monitor the programme being recorded, select the television PROG channel reserved for use with your VCR (or the AV input if used). INPUT INDEX Insert the cassette on which the programme is to be recorded, REPEAT with the window visible and the safety tab intact or the opening covered with adhesive tape.

  • Page 15

    Using the ShowView Feature (SV-6333X/SV-6332X/SV-2333X Only) Before presetting your VCR: Switch on both the television and your VCR Check that the date and time are correct Insert the cassette on which the programme is to be recorded (safety tab intact) Up to six programmes can be preset.

  • Page 16: Using The Quick Programming Feature, Checking A Preset Recording, Cancelling A Preset Recording

    Using the Quick Programming Feature The Quick Programming feature allows you to preset the VCR to record a programme up to one month before that programme is to be broadcast. Up to six programmes can be preset. Before presetting a recording, check that the date and time are correct.

  • Page 17: Playing A Cassette, Adjusting Picture Alignment Manually

    Playing a Cassette This function allows you to play back any pre-recorded cassette. Switch on both the television and your VCR. Insert the video cassette to be played. If the safety tab on the ❿ II cassette is intact, press Otherwise, the cassette is played automatically.

  • Page 18: Selecting The Colour Mode

    Press the ❿ button to select AUTO AUTO Set when you use a wide TV. The VCR detects wide TV programmes and normal TV programmes automatically when playing back and recording. The VCR always plays back and records in the mode compatible with 16:9 wide screen.

  • Page 19: Playing A Cassette In Slow Motion, Playing A Sequence Frame By Frame

    To return to normal playback, press When you have been using the Frame-by-Frame function for more than about five minutes, the VCR will auto- matically play to protect the cassette and video heads. Vertical stability: When playing back frame by frame, interference may be seen on the screen.

  • Page 20: Playing A Sequence At Variable Speeds, Searching For A Specific Sequence

    X1/10 X1/5 Searching for a Specific Sequence Each time you record a cassette on this VCR, an “index” is automatically marked on the tape when recording starts. The Search function allows you to fast-forward or rewind to a specific index and start playback from that point. Depending on the...

  • Page 21: Auto Repeat Play, Using The Tape Counter, Interval Repeat Play

    Indicates the elapsed time in the play and record modes (hours, minutes and seconds) Is reset when a cassette is inserted in the VCR Allows you to find the beginning of a sequence easily or ➛, ❿ buttons to select the ❷...

  • Page 22: Recording From Another Vcr Or Camcorder

    ) button again as often as necessary to advance frame by frame, until the exact recording position is located. While the VCR is in still mode, hold the REC button ( ) down for a while to activate the Assemble Edit function. Result: Record symbol flashes in the display.

  • Page 23: Technical Specifications, Problems And Solutions

    Dimensions (WxHxD) 360 x 94 x 285 mm 360 x 94 x 285 mm Problems and Solutions Before contacting the Samsung after-sales service, perform the following simple checks. Problem Explanation/Solution No power Check that the power plug is connected to a wall outlet.

  • Page 24

    TV Frequency Table (System-B/G) 002~012 :CCIR STD VHF 244~250 :MOROCO Germany Netherlands 013~020 :ITALY 251~255 :BELGUIM Spain Denmark 021~069 :CCIR STD UHF Italy Finland 071~075 :CCIR CABLE Austria Norway 201~241 :CCIR STD CABLE Switzerlands Sweden DISP CH Band DISP CH Band DISP CH 48.25...

This manual also for:

Sv-2333x, Sv-6332x, Sv-6333x

Comments to this Manuals

Symbols: 0
Latest comments: