Table of Contents
Advertisement
01823H SV-657GX/EUR-GB2
4/19/02 5:02 PM
TV programme Download (SV-657GX Only)
Preparation:
Turn on the TV.
Select the video channel or the video input
mode on the TV.
1
Press the MENU on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding
,
or ➛, ❿ buttons to
"
❷
select the
INSTALLATION
option.
And then press the OK button to select this option.
Result: The
INSTALLATION
menu is displayed.
3
Press the
or
buttons to select
AV-LINK
"
❷
SETTING
option. And then press the ❿!button to
select this option.
Result:
The
menu is displayed.
AV-LINK
4
Press the
or
TV CH
"
❷
buttons, until the
DOWNLOAD
option is selected.
And then press the ❿ button to select this option.
5
Press the ❿ button to start
TV CH DOWNLOAD
function.
6
When the downloading finished, then "
TV CH
DOWNLOAD FINISHED
" is displayed.
7
Press the MENU button to exit.
GB
The available position numbers on the
VCR are 1 to 80.
When the TV's channel position is
readjusted, the VCR automatically makes
"TV CH DOWNLOAD".
Direct Record Procedure (SV-657GX Only)
1
Load a cassette with the safety tab attached.
2
Press the SPEED button to select the recording tape
speed.
3
Press two REC buttons to start recording.
Result: The VCR automatically selects the same
picture as you are watching on the TV and
starts recording. Depending on the picture
sources, the recording switches the method.
See next page.
4
To stop a recording, press STOP ( ) once.
This recording is not available on the timer
programme recordings.
26
Page 26
TV Picture Record Setting (SV-657GX Only)
Preparation : turn on the TV.
1
Press the MENU on the remote control.
Result: The programming menu is displayed.
2
or ➛, ❿ buttons to
Press the corresponding
,
"
❷
select the
INSTALLATION
option.
And then press the OK button to select this option.
Result: The
INSTALLATION
menu is displayed.
3
Press the
or
AV-LINK
"
❷
buttons to select
option. And then press the ❿!button to
SETTING
select this option.
Result:
The
AV-LINK
menu is displayed.
4
Press the
or
buttons, until the
TV PICTURE
"
❷
option is selected.
RECORD
5
Press ➛ or ❿ until...
To...
Record the same picture
is displayed.
ON
as you are watching on the TV
when you press REC button ( )
on the your VCR remote control.
Record the selected picture on
OFF
isdisplayed.
your VCR when you press REC
button ( ) on your VCR
remote control.
6
Press the MENU button twice to exit.
If this option is in ON mode, you press the
REC button ( ) on the your TV remote
control, your VCR records the same picture
as you are watching on the TV.
Pictures and TV Picture Recording
(SV-657B Only)
Picture
Channel selected on the TV. If you performed
"TV CH DOWNLOAD" (TV stations stored on
the VCR and the TV in the same position order).
If you did not perform "TV CH DOWNLOAD" (TV
stations not stored on the VCR and the TV in the
same position order).
Pictures of external equipment connected to the TV
Channel selected on the VCR
The VCR
VCR channel of the same number as the TV
records:
channel
AV1 (output of the TV)
AV1 (output of the TV)
VCR channel
During recording, if you change the channel or the input
mode on the TV, the recording will be:
Ex. TV channel 1
Continued.
Stopped.
Stopped.
Ex. VCR channel 1
Continued.
Connecting an RCA Audio/Video Input Cable
(SV-657GX/SV-655GX/SV-651GX Only)
You can connect other audio/video equipment to your
VCR using audio/video cables if the appropriate
outputs are available on the equipment chosen.
Examples:
You wish to copy a video cassette with the help
of a second VCR.
You wish to play back and/or copy pictures
taken with a camcorder.
Make sure that both the television and the
VCR are switched off before connecting
the cables.
1
Connect one end of the RCA audio/video cable into
the VIDEO socket on the front of the VCR.
2
Plug the other end of the audio/video cable into the
appropriate output connector on the other system
(VCR or camcorder).
3
Connect one end of the RCA audio cable into the
AUDIO sockets on the front of the VCR.
Take care to respect the colour coding of the
left and right channels.
4
Plug the other end of the audio cable into the
appropriate output connectors on the other system
(VCR, camcorder or Hi-Fi sound system).
Recording from Another VCR or Camcorder
You can copy a cassette to your VCR from another
video source, such as another VCR or a camcorder.
It is an infringement of copyright laws to copy
prerecorded cassettes or to re-record them in
any form without the permission of the
owners of the corresponding copyright.
1
Connect the VCR, from which the cassette is to be
copied, to the appropriate SCART audio and video
input connectors on the rear of your VCR.
.
You can also use an RCA audio and video cable to
connect the AUX input on the front of your VCR.
(SV-657GX/SV-655GX/SV-651GX only)
2
Insert a blank cassette in your VCR.
3
Insert the pre-recorded cassette in the other video
source (VCR or camcorder).
4
Press the INPUT button to select the appropriate
input on your VCR:
AV1 or AV2 for the SCART input
AUX for the RCA input
(SV-657GX/SV-655GX/
SV-651GX only)
Using the Assemble Edit Function
This function allows you to start a new recording at a
specific position on the cassette while maintaining a
very smooth scene change.
1
Insert the cassette to be edited in your VCR.
❿
2
Press the
ll button to start playback.
3
When you reach the position from which you wish to
❿
start the new recording, press the
ll button.
F.ADV
4
Press the F.ADV (
) button again as often as
necessary to advance frame by frame, until the
exact recording position is located.
5
While the VCR is in still mode, hold the REC button
down for a while to activate the Assemble Edit
function.
Result: Record symbol flashes in the display.
6
Select the source from which you wish to record by
pressing:
The PROG/TRK (" or ❷) / PROG (" or ❷)
buttons for television channels
The INPUT button for the AV1, AV2 or AUX
(SV-657GX/SV-655GX/SV-651GX only) input
sources
7
❿
Press the
ll button to start recording.
8
When you have finished recording, press
.
5
Start playing back the cassette to be copied.
6
Hold REC down for a while to start recording on your
VCR.
7
When you have finished recording, press
on both
VCRs.
If you wish to view the cassette being
copied:
Your VCR must be connected as usual to
the television (see page 10 for further
details)
27
GB
Hide quick links:
Advertisement
Table of Contents
