Installing The Rf Fire Detection System; Installing The Fk 100 Lsn Rf Interface Module - Bosch DOW 1171 Operation Manual

14 en | Installing the RF Fire Detection System
5

Installing the RF Fire Detection System

5.1

Installing the FK 100 LSN RF Interface Module

Notice!
To create a fault-free radio connection, observe the following points:
The RF interface module must not be installed in a metal cabinet.
A minimum distance of 2 m must be maintained between individual RF interface modules
installed in the same area.
Notice!
In the case of a wall-mounted configuration, fit the RF interface module in a vertical position
to ensure that the writing on the cover can still be read.
4 x
4 x
Figure 5.9: FK 100 LSN RF Interface Module Dimensions
2016.04 | 6.0 | 4.998.120.885
∅ 6 mm
∅ 4.5 x 25 mm
15
Operation Guide
Radio Frequency Fire Detection System
76.5
9
9
61.5 15
100
Bosch Sicherheitssysteme GmbH