Table of Contents
Advertisement
Each of the following activities are performed in programming
Area 05. From the main menu, use [ ⇑ ], [ ⇓ ] or enter "05" on the
keypad to scroll to "Entry Codes, Enter Program Area 05" and
press [OK]. Press [
] when finished to return to the main menu.
*
Entering Entry Codes
NOTE: Entry codes should all have the same length. For the
best security, the entry codes should be at least four digits
long.
Use [ ⇑ ] or [ ⇓ ] to scroll to "Select Validation Group".
Use [⇐] or [⇒] to choose a validation group for the entry code. Press
[OK] when desired selection is blinking.
Enter up to eight digits for the entry code and press [OK].
For additional entry codes with the same validation group repeat Step 3. For
entry codes in other validation groups, repeat Steps 1-3.
Suspending Entry Codes
Use [ ⇑ ] or [ ⇓ ] to scroll to "Suspend Entry Code".
Enter the entry code to suspend and press [OK].
To suspend additional entry codes, repeat Steps 1 & 2.
Reactivating Entry Codes
Use [ ⇑ ] or [ ⇓ ] to scroll to "Reactivate Entry Code".
Enter the entry code to reactivate and press [OK].
To reactivate additional entry codes, repeat Steps 1 & 2.
Status of Entry Codes
Use [ ⇑ ] or [ ⇓ ] to scroll to "Status of Entry Code".
Enter the entry code for status and press [OK].
AREA 05
ENTRY CODES
Area 05 is used to enter, suspend, reactivate, delete, and
check the status of keypad entry codes. A validation group
can be selected for each entry code when it is entered into
AREA 05
ENTRY CODES
Select Validation Group.
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Enter Entry Code.
Entry Code: ********
Suspend Entry Code.
Entry Code: ********
Reactivate Entry Code.
Entry Code: ********
Status of Entry Code.
Entry Code: ********
Delete Single Entry Code
Entry Code: ********
Delete All Entry Codes.
Are You Sure? Yes No
To view status of additional entry codes, press [OK] then repeat Steps 1 & 2.
Deleting One Single Entry Code
Use [ ⇑ ] or [ ⇓ ] to scroll to "Delete Single Entry Code".
Enter the entry code to delete and press [OK].
To delete additional entry codes, repeat Steps 1 & 2.
Deleting All Entry Codes
NOTE: Facility Managers should not use this function. Contact the
Installer for making any complex or critical programming changes.
5.1
5.2
5.3
5.4
5.5
5.6
5.7
memory.
7
Advertisement
Table of Contents
