Table of Contents
Advertisement
INTRODUCTION
The Model AE-1 Telephone Entry Control Console is designed
for use as a primary access control device for gated
communities, parking garages, office buildings, apartments,
dormitories, hotels/motels, commercial buildings and
recreational facilities.
The unit's electrical connections have been made and the basic
system functions have been programmed by your installer. This
manual will guide you through programming the functions
typically used with the AE-1 Telephone Entry System.
The programming areas covered are:
• Area 01 Single Transmitter Programming
• Area 02 Block Transmitter Programming
• Area 05 Entry Code Programming
• Area 06 Block Card Programming
• Area 07 Telephone Entry Numbers Programming
Included are pages for telephone entry code and entry media
code logs. They may be copied if additional log entries are
required. In addition, keypad function and system programming
overviews are also provided.
SYSTEM OPERATION
In a typical installation, the unit's memory would be
programmed with each tenant's name and directory code
number. A visitor would use the
the directory names and code number for the desired party.
Upon entering the directory number, the AE-1 will automatically
dial the tenant's telephone number and establish two-way voice
communication between the visitor and the tenant. The tenant
will then have the option to grant access to the guest by
pressing a digit on their telephone.
In addition to the telephone entry, the AE-1 can grant access
using various remote devices that are commonly used. These
devices include wireless transmitters, proximity receivers,
swipe card readers and remote keypads.
Access can also be granted by entering a programmed entry
code on the AE-1's keypad.
All of the programming functions of the AE-1 can be performed
directly through the AM/II keypad inside the AE-1. An optional
telephone modem can be installed for easy remote
programming with a personal computer.
INSTALLER SET OPTIONS
SYSTEM PASSWORD: _______________
DIRECTORY CODE LENGTH: __ 1 __ 2 __ 3 __ 4
DIRECTORY BEGINS AT: __ BEGINNING(A) __ MIDDLE(M)
PBX DIALING DIGIT: ___
TALK TIME: ______ SECONDS
MAXIMUM DIRECTORY ENTRIES: ______
RELAY "A" ____________ TELEPHONE DIGIT: ___
RELAY "B" ____________ TELEPHONE DIGIT: ___
RELAY "C" ____________ TELEPHONE DIGIT: ___
RELAY "D" ____________ TELEPHONE DIGIT: ___
2
or # key on the AE-1 to view
*
YOUR INSTALLER HAS PRE-SET THESE SYSTEM OPTIONS
USERS CAN GRANT ACCESS WITH
THEIR PUSHBUTTON TELEPHONE
VALIDATION GROUP 0: FULL ACCESS AT ALL TIMES
VALIDATION GROUP 1: ___________________________________
VALIDATION GROUP 2: ___________________________________
VALIDATION GROUP 3: ___________________________________
VALIDATION GROUP 4: ___________________________________
VALIDATION GROUP 5: ___________________________________
VALIDATION GROUP 6: ___________________________________
VALIDATION GROUP 7: ___________________________________
VALIDATION GROUP 8: ___________________________________
VALIDATION GROUP 9: ___________________________________
VALIDATION GROUP 10: ___________________________________
GUEST ENTERS DIRECTORY CODE
NUMBER OR USERS ENTER THEIR
ENTRY CODE ON THE AE-1
Advertisement
Table of Contents
