Table of Contents
Advertisement
Each of the following activities are performed in programming
Area 01. From the main menu, use [ ⇑ ], [ ⇓ ] or enter "01" on the
keypad to scroll to "Single Transmitter(s), Enter Program
Area 01" and press [OK]. Press [
the main menu.
Learning Single Transmitters
Use [ ⇑ ] or [ ⇓ ] to scroll to "Learn Single Xmtr(s)" and press [OK].
Use [⇐] or [⇒] to choose a validation group for the transmitter. Press
[OK] when desired selection is blinking.
Enter the desired transmitter ID# and activate the transmitter.
NOTE: If the transmitter ID # is already in use, an asterisk will show before
the ID #.
For additional transmitters in the same validation group, use [ ⇑ ] or [ ⇓ ] to
select the next ID# and repeat Step 3.
For additional transmitters in different validation groups, press [OK] and
repeat Steps 1-3.
Suspending Single Transmitters
Use [ ⇑ ] or [ ⇓ ] to scroll to "Enter Single Xmtr Numb".
Enter the transmitter ID# to suspend and press [OK].
Use [ ⇑ ] or [ ⇓ ] to select "Suspend Single Xmtr" and press [OK].
To suspend additional transmitters, repeat Steps 1-3.
Reactivating Single Transmitters
Use [ ⇑ ] or [ ⇓ ] to scroll to "Enter Single Xmtr Numb".
Enter the transmitter ID# to reactivate and press [OK].
Use [ ⇑ ] or [ ⇓ ] to select "Reactivate Single Xmtr." and press [OK].
To reactivate additional transmitters, repeat Steps 1-3.
AREA 01
SINGLE TRANSMITTER PROGRAMMING
AREA 01
SINGLE TRANSMITTERS
1.1
Learn Single Xmtr(s)
Press OK when Ready
1.2
Enter Single Xmtr Numb
Enter Xmtr. ID: 000
1.3
Suspend Single Xmtr.
Transmitter ID: = [0000]
1.4
Reactivate Single Xmtr.
Transmitter ID: = [0000]
1.5
Status of Single Xmtr.
Transmitter ID: = [0000]
1.6
Enter Expiration Date.
Expires On: mm/dd/yyyy
1.7
Delete One Single Xmtr.
Transmitter ID: = [0000]
1.8
Delete All Single Xmtr.
Are You Sure? Yes No
] when finished to return to
*
Area 01 is used to enter, suspend, reactivate, delete, and
check the status of single transmitters. A validation group
can be selected for each transmitter when it's entered into
1.1A
Select Validation Group.
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
1.1B
Learning Transmitters
Transmitter ID: = 0001
1.5A
Item/Code:
Press OK When Ready
Status of Single Transmitters
Use [ ⇑ ] or [ ⇓ ] to scroll to "Enter Single Xmtr Numb".
Enter the transmitter ID# for status and press [OK].
Use [ ⇑ ] or [ ⇓ ] to select "Status of Single Xmtr." and press [OK].
To view status of additional transmitters, press [OK] then repeat Steps 1-3.
Transmitter Expiration Date
Use [ ⇑ ] or [ ⇓ ] to scroll to "Enter Single Xmtr Numb".
Enter the transmitter ID# and press [OK].
Use [ ⇑ ] or [ ⇓ ] to select "Enter Expiration Date".
Enter the date for the transmitter to be automatically suspended (in
mm/dd/yyyy format) and press [OK].
To set additional transmitters for expiration, press [OK] then repeat
Steps 1-4.
Deleting One Single Transmitter
Use [ ⇑ ] or [ ⇓ ] to scroll to "Enter Single Xmtr Numb".
Enter the transmitter ID# to delete and press [OK].
Use [ ⇑ ] or [ ⇓ ] to select "Delete Single Xmtr." and press [OK].
To delete additional transmitters, repeat Steps 1-3.
Deleting All Single Transmitters
NOTE: Facility Managers should not use this function. After deleting
all single transmitters, active transmitters must be retrieved from all of
the users to allow reprogramming.
memory.
5
Advertisement
Table of Contents
