Table of Contents
Advertisement
SYSTEM CONFIGURATION PROCEDURE
7 SYSTEM CONFIGURATION PROCEDURE
• Device Delay Configuration, page 35
• Pump Station Configuration, page 38
• Valve Configuration, page 39
• Valve Flow Rate, page 40
• Water Meter, page 41
• Dosing Channel Configuration, page 42
• Dosing Configuration, page 43
• Drainage Configuration, page 44
• EC/pH Configuration, page 44
• Cooling Configuration, page 45
• Misting Configuration, page 45
• History Resolution, page 45
• System Nutrigation™ Check, page 46
7.1 Device Delay Configuration
The Device Delay Configuration screen enables defining the startup and shutdown order of the irrigation process.
• On (mm:ss): On is the definition of the startup order. The set times are taken from procedure startup. The
device with the shortest time will be started first and shifted to procedure startup. Therefore it is recommended
that the device that is to be started first be set as 00:00 (automatically changes to --:--).
• Off (mm:ss): Off is the definition of the shutdown order of the irrigation process. The set times are taken from
procedure shutdown. The device with the shortest time will be stopped first and shifted to procedure
shutdown. Therefore it is recommended that the device that is to be stopped first be set as 00:00
(automatically changes to --:--).
CONFIGURATION
1. DEVICE DELAY CONFIGURATION
2. PUMP STATION CONFIGURATION
3. VALVE CONFIGURATION
4. VALVE FLOW RATE
5. WATER METER
6. DOSING CHANNEL CONFIGURATION
7. DOSING CONFIGURATION
8. DRAINAGE CONFIGURATION
9. EC/PH CONFIGURATION
10. COOLING CONFIGURATION
11. MISTING CONFIGURATION
NMC-Junior Pro Installation Manual
Page 35
Advertisement
Table of Contents
