Radio System Alarm Definition - Netafim nmc-pro User Manual

ALARM MENU
4.7 R adio System Alarm Definition
3 4 B
Use this function to define Radio Systems alarm activity and notification.
IMPORTANT: For the Radio System to work properly, you MUST define in the 6.2 SYSTEM SETUP menu –
Remote Unit type parameter SN/RF Net.
3. Alarm
• The ACTIVE column defines if the alarm is used in making a decision regarding the irrigation program (YES /
NO)
• The INFORM column defines if the system notifies the user of the alarm occurrence (YES / NO)
4.8 R adio System Alarm View
3 5 B
This screen displays the current alarm status of the Radio System.
3. Alarm
The S/N column is the unit number. When an Open Circuit or Short Circuit alarm is detected, the system also displays
the card number and the input/output number that is problematic.
For example: RTU –
Exiting and re-entering refreshes the alarm status screen.
7. Radio Sys Alarm
Definition
8. Radio Sys Alarm
View
0555.3.1
UNIT # CARD # INPUT/OUTPUT#
RADIO SYS. ALARM DEFINITION
Delay
Alarm Type mm:ss
RTU
Vbatt failure 00:00
Vbatt low 00:00
Vbatt warn 00:00
Cap failure 00:00
Card failure 00:00
I/O Open 00:00
I/O Shor 00:00
HOST
Over current 00:00
RADIO SYS. Alarm view
Unit S/N Comm
HOST 0128 OK
BASE 0117 FAIL
RTU 0236 OK
RTU 0115.3.4 -
RTU 0513.4.1 -
RTU 0198 -
RTU 0555.3.1 -
RTU ---- -
RTU ---- -
RTU ---- -
Active Inform
YES YES
NO YES
NO YES
NO YES
NO YES
NO YES
NO YES
NO YES
Vin
Card
state
- -
- -
- 3.1
OK
FAIL
WARN
LOW
-
-
-
NMC-PRO
User Manual
Page 50