5. MOTOR ON/OFF SWITCH (EMERGENCY)
The motor switch (15) is placed on the motor in an easily visible position and can
be rapidly activated in case of emergency.
It is a tilt switch and provided with an interlock device to avoid unintentional start-ups.
The switch has two specifi c functions:
Start / Stop of the drill:
slide the interlock device forward (1) and
press the switch into operating position (2).
To stop the drill, return the switch to its cen-
tral position (0).
2
1
Two high effi ciency LED worklights enable effi cient illumination of the drilling area (e.g. in tunnels or outdoors at
night).
Use the ON/OFF switch (16) on the side of the motor switch to activate or deactivate the automatic illumination of
the lights on the front of the motor.
ON position: the lights turn on automatically at start-up and turn off automatically 20 seconds after the motor is
switched off .
OFF position: no automatic illumination, the lights remain off .
6. LED WORKLIGHTS ON/OFF SWITCH
16
"Indexing" function:
is useful for easy access to the grub screws on the drill
spindle.
With one fi nger, keep the interlock device forward (1)
and with another repeatedly push the switch down (2).
With each press of the switch, the spindle rotates by
10°.
OFF in
central position
15
2
1
14