Product Storage And Management - Sena R1 Getting Started

Safety PReCautionS
WARNING
• Do not use the product in direct sunlight for a long period of time. Doing so can
damage the product and generate heat that can cause burns.
• Do not use or store the product inside cars in hot weather. It may cause the
battery to generate heat, rupture, or ignite and cause serious injury.
• Do not continue charging the battery if it does not recharge within the specified
charging time. Doing so may cause the battery to become hot, explode, or ignite
and cause serious injury.
• Do not leave the product near open flames. Do not dispose of the product in a
fire. It may cause the battery to become hot, explode, or ignite and cause serious
injury.
• Never attempt to charge a battery with the charger which has been physically
damaged. It may cause explosion and/or accidents.
NOTICE
• Battery life may vary depending on conditions, environmental factors, functions of
the product in use, and devices used with it.

Product Storage and Management

Take the following precautions to avoid personal injury or damage to your product
while storing and maintaining the product.
CAUTION
• Do not dispose of the product with household waste. The built-in battery is not
to be disposed of in municipal waste stream and requires separate collection.
Disposal of the product should be done in accordance with the local regulations.
• Never leave the product with the lens facing the direct sunlight. Doing so may
result in a fire due to the sunlight being concentrated by the lens.
NOTICE
• Keep the product free of dust. Dust may damage mechanical and electronic parts
of the product.
• The product should be stored at room temperature. Do not expose the product
to extremely high or low temperature as this may reduce the life span of electronic
devices, damage the battery, and/or melt plastic parts of the product.
• Do not clean the product with motor fuel, thinners, cleaning solvents, toxic
chemicals, or strong detergents as this may damage the product. Make sure
the helmet does not come into contact with such substances, even for cleaning
purposes as these substances can destroy the structure of the shell.
• Do not paint the product. Paint may obstruct moving parts or interfere with the
normal operation of the product.
• Do not drop or otherwise shock the product. It may damage the product or its
internal electronic circuits.
• Do not disassemble, repair or modify the product as this may damage the product
and invalidate the product warranty.
• Do not store the product in humid environments, especially for long periods of
time. It may damage the internal electronic circuits.
MENU
R1 Smart Cycling Helmet | 10