Configuration Menu - Sena R1 Getting Started

2 GETTING STARTED: BUILT-IN BLUETOOTH SYSTEM

2.7 Configuration Menu

The Bluetooth system can be configured by following a series of voice
prompts. Further details about each of these settings will be explained
on the following pages.
1. To access the Bluetooth System Configuration Menu, press and
hold the Center Button for 10 seconds until you hear the voice
prompt, "Configuration menu".
Accessing the Bluetooth System Configuration Menu
=
ACCESS
CONFiG.
MENU
2. Tap the (+) Button or the (-) Button to navigate between the menus.
You will hear voice prompts for each menu item. The list of functions
is shown in the Bluetooth System Configuration Menu on page
27.
Navigating Forward through the Menu
=
NAviGAtE
FOrwArd
HOLD
10s
"Configuration menu"
TAP
1x
"[Menu prompt]"
MENU
R1 Smart Cycling Helmet | 26