Sena R1 Getting Started page 9

Safety PReCautionS
• The camera generates a low level magnetic field. Keep a safe distance between
the camera and cardiac pacemakers to avoid potential interference. Turn off the
camera immediately if your camera indicates interference with a pacemaker and
contact the pacemaker manufacturer or a physician.
• Avoid interference with other electronic devices. Your camera generates a low
level magnetic field that may interfere with unsealed or improperly shielded
electronic equipment in homes or vehicles. Consult the manufacturers of your
electronic devices to resolve any interference problems you experience.
• Never use a damaged memory card. This may result in electric shock, camera
malfunction, or fire.
NOTICE
• In some regions, it is prohibited by law to ride bicycles while wearing headsets
or earbuds. Therefore, be certain you are aware of all relevant laws in the region
where you are using the product and are sure that you comply with them.
• Do not use the product in high-temperatures or apply heat to the product as this
may cause damage, explosion, or fire.
• Do not use heat damaged helmets. Heat damaged helmets will appear to have
uneven or have bubbly surfaces.
• If the product emits an unusual smell, feels hot, or appears abnormal in any other
way while using or charging, stop using it immediately. It may cause damage,
explosion, or fire. Contact your sales location if any of these problems are
observed.
• Do not attach anything to your helmet, including mirrors or lights.
• Keep product away from pets or small children. They may damage the product.
• Do not cause impact to the product or touch it with sharp tools as this may
damage the product.
• In any place where wireless communication is prohibited, such as hospitals
or airplanes, turn off the power. In a place where wireless communication is
prohibited, electromagnetic waves may cause hazards or accidents.
• Do not use the product near hazardous explosives. When it is near any explosion
hazards, turn off the power and heed any regulations, instructions, and signs in
the area.
• Any changes or modifications to the helmet not expressly approved by the party
responsible for compliance could void the limited warranty to operate the helmet.
• High internal temperature may result in noisy photos. This is not a malfunction
and does not affect your camera's overall performance.
• Check that the camera is operating properly in advance. Any file loss or camera
damage caused by camera malfunction or improper use is not covered under
warranty.
Battery
Your product has a built-in battery. Be careful to heed all safety information in this
guide. Failure to carefully observe the safety precautions can cause battery heat
generation, bursting, fire and serious personal injury.
MENU
R1 Smart Cycling Helmet | 9