Powering On And Off; Charging - Sena R1 Getting Started

2 GETTING STARTED: BUILT-IN BLUETOOTH SYSTEM

2.2 Powering On and Off

Press and hold the Center Button and the (+) Button at the same time
for 1 second to turn the Bluetooth system on or off.
Powering On/Off
=
POwEr
ON/OFF
dEviCE

2.3 Charging

wArNiNG: When charging the battery, use only the approved
charger provided by the manufacturer. Use of a non-approved charger
may cause fire, explosion, leakage, and other hazards which may also
reduce the life time or performance of the battery.
The Bluetooth system can be charged using many common methods via
the supplied USB power & data cable:
1. Plugged into a computer's USB port.
2. With a USB-equipped AC adapter via a wall-outlet charger.
Note:
• Please make sure to take off your helmet while charging. The
Bluetooth system automatically turns off during charging.
• Any 3rd party USB charger can be used with Sena products if the
charger is approved by either the FCC, CE, IC or other locally
approved agencies that Sena accepts.
HOLD
1s
R1 Smart Cycling Helmet | 21
MENU