Sena R2 EVO - Smart Road Cycling Helmet Quick Start Guide

Downloadable Sena Software

Download the Sena Cycling App at Google Play Store or App Store.

Sena Cycling

Download the following items at sena.com.

	Firmware
	Sena Device Manager Firmware upgrade Device configuration setting
	Quick Start Guide, User's Guide

Product Details

How To Wear the Helmet

1. Position the helmet on your head with the front covering your forehead.
2. Position the strap adjuster centered, just below your ears.
   
   
3. Position the helmet low on your forehead with the buckle under the chin and back against the throat. The straps should fit comfortably around both ears.
4. After removing the chinstrap pad, adjust the chinstrap tension at the buckle so the chinstrap is tight and comfortable by pulling the chinstrap end through the buckle to either tighten or loosen as needed.

• For more information about "How To Wear the Helmet", refer to the User's Guide.

Icon Legend

	Tap button the specified
	Press and Hold button for the number of times specified amount of time
	Audible prompt

Basic Operations

Powering On

Powering Off

Volume Up

Volume Down

Checking the Battery Level

Phone Pairing

When you initially turn on the Bluetooth system:

1. 
   
   
   
2. Select R2 EVO in the list of Bluetooth devices detected.
   
   

• For more information on phone pairing, refer to the User's Guide.

Using the Phone

Answer a Call

End a Call

Reject a Call

Voice Dial

Music Control

Play/Pause

Track Forward

Track Backward

Mesh Intercom™

Mesh Intercom: communication within the same channel.

• For more information on Mesh Intercom, refer to the User's Guide.

Mesh Intercom On

Mesh Intercom Off

NOTE:
When Mesh Intercom is on, the R2 EVO will automatically connect to nearby R2 EVO users and the Bluetooth system will initially be on channel 1.

Channel Setting (Default: channel 1)

You can select one of 1 to 9 channels.

1. Enter into the Channel Setting.
   
   
   
   
2. Navigate between channels. (12 ••• 8 9 Exit 1 •••)
   
   or
   
   
   
   
3. Save the channel.
   
   
   
   
   NOTE:
   You can use the Sena Cycling App to change the channel.

Enable/Disable Mic (Default: Enable)

Users can enable/disable the microphone when communicating in a Mesh Intercom.

LED Taillight

Using the Voice Command

LED On





or

LED Off





or

TYPE	OPERATION	BUTTON COMMANDS
Basic Operations	Power on
	Power off
	Volume up/down
Mobile Phone	Answer phone call
	End/reject phone call
	Voice dial
Music	Play/Pause music
	Track forward
	Track backward
Mesh Intercom™	Mesh Intercom on/off
	Mic enable/disable
	Channel setting
LED Taillight	LED on and solid
	Night flash
	Day flash
	LED off

Follow us on Facebook, YouTube, Twitter and Instagram to check the latest information and helpful tips.

SENA Technologies, Inc.
Customer Support: sena.com

Documents / Resources

References

• The Best Motorcycle & Action Sport Bluetooth Devices | Sena

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Sena R2 EVO - Smart Road Cycling Helmet Quick Start Guide