If the battery is discharged the
engine can be started with jum per
cables (minimum lead cross sec
tion is 35 mm2) and the (12 V) bat
tery of another vehicle. Proceed as
follows:
• Turn key to steering lock
0
position "
".
• Run engine of jum per vehicle
at high idle.
• First connect jum per cables to
the positive battery terminals and
then to the negative terminals.
• Start engine as normal.
• After the engine has started,
first remove jum per cables from
the negative battery terminals
and then from the positive
terminals.
Jump Starting
Instructions:
A discharged battery can freeze at
approx. -1 0 ° C /+ 1 4 ° F. In all cases
it must be thawed out before jum
per leads are used.
Never lean over batteries while
jum p starting, you might get
burned.
t
73