Electrical System
License Plate Lamp
Loosen both the securing screws
1
(
) of the lamp, detach lens with
2
gasket (
) and pull down lamp hol
der (3) on the L-H side. When
replacing the lens, it must be
assured that the lug in the lens is
on the L-H side.
68
Footwell Lamps
Press off lamp (1) at the nose (2),
replace bulb and press lamp on
again.
Dome Lamps
380 SLC:
To replace the bulb, slightly press
forward dome lamp to the right (
2
lift up at left side (
) and then pull
out to the left.
Remove rear dome lamp likewise.
380 SL:
To replace the bulb, pull out lamp.
1
),