Mercedes-Benz 380 SL Owner's Manual page 69

13 Bulb for turn signal, clearance
and standing lamps:
The lamps are located below
the bumper.
Loosen securing screws 11
12
and remove lens .
Depress bulb 13, turn left and
pull out. When replacing the
lens, it must be ensured that
the lug in the lens is at the
bottom.
14 Bulb for fog lamp:
Loosen securing screws 15
and remove housing.
Detach holding spring 16,
remove bulb 14 and discon­
nect plug 17.
Electrical System
Tail Lamp Assembly
Remove both knurled nuts in the
trunk and pull off lens assembly.
To replace the bulbs, depress, turn
left and pull out.
1 Backup lamp
2 Stop lamp
3 Tail, parking and standing lamp
4 Turn signal lamp (ball lamp)
side marker lamp (festoon lamp)
i
67