Practical Hints
Ash trays
Removal of front ash tray:
>
Pull out ash tray up to the stop.
Depress center locking spring (1)
and remove ash tray.
To install ash tray:
Position ash tray squarely and
push in.
58
Removal of rear ash tray (380 SLC):
Press down ash tray when opening
it and remove it.
To install ash tray:
Position ash tray squarely and
push in.
Rear Seat Cushion (380 SLC)
Removal:
Push in left and right spring clamps
1
(
), slightly raise rear seat cushion
at the front side and pull toward the
front.
Installation:
Push rear end of rear seat cushion
under rear seat back as far as it will
go and press seat cushion front
section downward until it rests on
the cushion support.