Installing Auxiliary, Control And Serial Communication Cables; Control And Power Supply Cables For Fan Units - ABB ACS580MV Quick Manual

Installing auxiliary, control and serial communication
cables
Route the cables as illustrated through the provided cable duct to the customer terminals
or fieldbus modules in the control compartment. Pay attention to avoid auxiliary, control,
serial communication cables mix together with power cables.
2
1 Duct for auxiliary and control cables
2 Customer terminals

Control and power supply cables for fan units

1. Route the control and power supply cables through one of the cable entries located in
the floor of the fan unit. Choose either the front or the rear cable entry, according to the
position of the fan cable connector.
2. Connect each cable to the appropriate connector.
NOTICE
The control and power supply cables are already prepared in the factory for connection.
Electrical installation 25
2
1