RIDGID SeekTech SR-20 Operator's Manual page 41

Data Log Files
During continuous streaming (logging is enabled), GPS
data is sent once per second and SIG and LCD data is
sent twice per second� Data is logged on your Bluetooth
device and the internal SD card at the same time�
The internal SD card acts as a USB drive and stores
data that can be exported� If logging is enabled for all
data, the SD card's capacity fills up at a rate of 3 MB per
hour� The included 16 GB SD card will take 5,461 hours
to fill capacity�
Note: Ridge Tool Company and its affiliates reserve the
right to change the specifications of the hardware, soft-
ware, or both as described in this manual without notice.
Refer to www.RIDGID.com/SR24 for current updates
and supplemental information pertaining to this product.
Data logged on the internal SD card is saved in a �txt for‑
mat file� To export data log files from the SD card, follow
these steps:
1� Connect the SR‑24 to a computer with a mini‑B
USB cable�
Note: The SR-24 does not need to be powered on
to transfer files.
2� Open the folder to view files when prompted�
3� There are three folders stored on the SD card� Open
the folder named "logs�"
Note: The folders named "bootloader_files" and
"gps_binary_logs" are not used during normal op-
eration.
English – 41