RIDGID SeekTech SR-20 Operator's Manual page 14

Icon Name
Tracing Line
Distortion Line
Guidance Arrows
Guidance Line
Cross Hairs
Rotation Arrows
SD Card and Usage
Bar Graph
GPS
GPS Estimated
Positional Error
No GPS Signal Lock
Battery Status
Backlight
Bluetooth
14 – English
Line Trace Mode Display Elements
Description
The orientation and offset of the Tracing Line indicate the direction of the
target line relative to the position of the receiver� The Tracing Line Distortion
Response is enabled by default� When the Tracing Line Distortion Response
is enabled the Tracing Line also represents the amount of distortion detected
by the receiver and the approximate axis of the target line� Increasing levels of
field distortion are represented by increasing degrees of fuzziness�
The Distortion Line represents the signal from the Upper Antenna node�
Compare the Tracing Line and the Distortion Line to estimate the degree of
distortion on the signal� The Distortion Line is disabled by default and only
appears if the Tracing Line Distortion response is disabled�
When the Guidance Arrows are touching, they indicate the point where the
strength of the field is equal on both sides of the receiver�
The Guidance Line shows the alignment of the Tracing Line and when the
orientation of the SR‑24 is close to the orientation of the utility�
The Cross Hairs are placed at the center of the Active View Area to represent
the receiver's location�
When the receiver is out of alignment with the target line, two rotation arrows
appear to indicate the direction you should turn the receiver to realign with
the target line� Correct orientation of the receiver is required for the Guidance
Arrows and Guidance Line to function properly� The Rotation Arrows only
appear when the receiver is not in line with the target line�
The SD Card and Usage Bar Graph icon indicates the SR‑24 is logging to the
installed SD Card� The Usage Bar Graph shows disk space usage�
The GPS icon indicates the internal GPS feature is enabled�
GPS Estimated Positional Error is the number next to the GPS icon� It
indicates the Estimated Positional Error of the internal GPS� Refer to the
SR‑24 GPS section for more information�
Internal GPS signal is not locked and is searching for satellites�
The Battery Status icon indicates the amount of charge remaining in the
batteries�
The Backlight icon indicates the Backlight is on�
The Bluetooth icon indicates the Bluetooth feature is enabled and the SR‑24
is connected to and paired with a Bluetooth enabled device�