RIDGID SeekTech SR-20 Operator's Manual page 35

Disconnecting Bluetooth
There are two ways to disconnect the SR‑24 and your
Bluetooth device� Disconnect Bluetooth from your
Bluetooth device or from the SR‑24's Main Menu�
Note: Refer to your Bluetooth device for information on
how to disconnect a Bluetooth connection from your
Bluetooth device.
To disconnect the SR‑24 and your Bluetooth device from
the SR‑24's Main Menu, follow these steps:
1� Press the Menu Key
2� Use the Down Arrow Key
Bluetooth Options icon
Select Key to open the Bluetooth Options menu�
3� Highlight the Disconnect icon
press the Select Key
and your Bluetooth device� When disconnected,
the Disconnect icon will change back to the Search
icon �
4� Press the Menu Key
Note: To make changes to the Pin, Bluetooth Power, or to
view the Bluetooth Information screen, you must first dis-
connect the Bluetooth.
to open the Main Menu�
to highlight the
and press the
and
to disconnect the SR‑24
to exit�
Bluetooth Pin
Some Bluetooth devices require a pin to connect to the
SR‑24� If a pin is necessary, enter the SR‑24's pin into
your Bluetooth device�
The default pin is 1234.
If desired, you can change the SR‑24's Bluetooth pin
on the SR‑24� To change the SR‑24's pin, follow these
steps:
1� Disconnect the SR‑24 and your Bluetooth device�
Note: Refer to the previous section for instruc-
tions on how to disconnect the SR-24 and your
Bluetooth device.
2� Highlight the Bluetooth Pin icon
Bluetooth Options menu and press the Select Key
to open the Bluetooth Pin screen�
3� Use the Left and Right Arrow Keys
between digits and use the Up and Down Arrow
Keys to increase and decrease the value of
the digits�
4� Press the Select Key
Bluetooth Pin screen�
5� To abort any changes to the pin, press the Menu
Key to return to the Bluetooth Options menu�
in the
to move
to save the pin and exit the
English – 35