Roland V-Card VC-1 D-50 Owner's Manual page 74

Settings for the Entire VC-1
Exclusive (Exclusive Switch)
To receive or transmit Exclusive messages (Roland ID Number only), set this to On, P-Dump or TxEdit.
Value: Off, On, P-Dump, TxEdit
Display
On
P-Dump
TxEDIT
* When set to P-Dump, the Patch you select is transmitted to an external device. However, it cannot be transmitted
by Patch Shift with the pedal switch, or by patch selection with the Program Change messages sent from an external
device.
Bank.S (Bank Select Switch)
To receive or transmit Bank Select messages, set this to On.
Value: Off, On
74
Function
Normally.
The patch data that you select is transmitted.
The parameter data that you edited is transmitted.