Roland V-Card VC-1 D-50 Owner's Manual page 49

Initializing Patch Settings
Initialize means to return the settings of the currently selected patch to a standard set of values. The
Initialize operation will affect only the currently selected patch in temporary area; the patches that are
stored in internal memory and work area will not be affected. If you wish to restore all of the VC-1's
settings to their factory values, perform a Factory Reset (p. 28).
fig.08-09(Patch_Initialize)
1.
Access the PATCH TOP screen, and select the patch that you wish
to initialize (p. 12).
2.
Touch <
appears.
3.
In the pulldown menu, touch <INITIALIZE>. The INITIALIZE
window appears.
fig.08-10(LCD_Initialiae)
4.
Touch some buttons (checkbox) in the screen to select the object
you want to initialize (✔).
<Check All>:
<PATCH FACTOR>:
<CTRL SETUP>:
<COMMON>:
<PART-1>:
<PART-2>:
5.
Touch <Execute>. The initialization will be carried out, and you'll
be returned to the PATCH TOP screen.
> in the upper right of the screen. A pulldown menu
Mark all object.
Patch factor settings. (p. 19)
Control setup settings. (p. 19)
Common parameter settings. (p. 50)
Partial-1 parameter settings. (p. 56)
Partial-2 parameter settings. (p. 56)
Creating a Patch
49