Reset To Default Factory Settings - Roland V-Card VC-1 D-50 Owner's Manual

Saving Patches You've Created

Reset to Default Factory Settings

This restores all data in the VC-1 to the factory-set condition (Factory Reset).
If there is important data you've created that's stored, all such data is discarded when a Factory Reset is
performed. If you want to keep the existing data, save it as describe below.
• Transmit it to an original D-50 (or an external MIDI device), and save it (p. 33).
• Transmit it to a PC using V-Synth XT USB function, and save it.
* For details on V-Synth XT USB function, refer to the V-Synth XT owner's manual.
1.
Press [MODE]. The MODE MENU window appears.
2.
Touch <FACTORY RESET>. The Factory Reset screen appears.
fig.08-11(ModeMenu)
3.
Touch <OK>
4.
Touch <Execute> to execute the Factory Reset. When the display indicates "Completed!," the factory
reset operation has been completed.
The VC-1's File Structure
As seen from your computer, the VC-1's file structure is as follows.
fig.11-09e(Vc1FileStructure)
• You can use the computer to copy (back up) these files to
the computer (e.g., the hard disk).
• Do not perform operations on your computer to erase
(format) or rename these folders or files.
28
System Parameter
Patches of Internal Bank