Assigning Parameters To The Controllers - Roland V-Card VC-1 D-50 Owner's Manual

Applying Effects to the Sound

Assigning Parameters to the Controllers

You can assign a variety of patch factors (p. 81), tone parameters (p. 82), and other settings to the V-Synth
XT's complement of controller sections. This is referred to as the Control Setup. With intuitive editing of
sound sources with the knobs, you can use the D-50 in ways that go way beyond the original instrument.
Controllers
E1–E8 knobs
1.
Access the PATCH TOP Screen.
2.
Touch
3.
When editing a parameter that requires you to specify a value, move the cursor to the value box of that
parameter. Then modify the value by either turning the VALUE dial or pressing [INC/+] or [DEC/-].
Parameters marked by
refer to the corresponding reference page.
The on-screen keys have the following functions.
Keys
16
in the lower left of the screen. The CTRL SETUP window appears.
can be controlled by specific CTRL Setup. For details on each parameter,
Functions
Displays the parameters to be assigned
as a list.
Returns to the screen.
Restores the assigned parameters to their
original factory condition.
Parameters
Patch Factor (p. 81)
Tone Parameters (p. 82)
Partial Parameters (p. 83)