Roland V-Card VC-1 D-50 Owner's Manual page 59

WG PITCH
WG Pitch
fig.09-26(LCD_WgPitch)
Coars (Pitch Coarse)
Sets the standard pitch of a Partial in semi-tone steps. The
standard pitch is the pitch at C5 (middle C) key.
Value: C1–C7
Fine (Pitch Fine)
The standard pitch can be altered over about +/- 50 cents.
Value: -50–+50
fig.09-27e(PitchKeyFollow)
KF (Keyfollow (pitch))
Usually, the keyboard to a synthesizer assigns a semi-tone to
each key. This parameter can change the pitch ratio as show
below. The value represents how many octaves are changed
over 12 keys.
Value: -1, -1/2, -1/4, 0, 1, 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 5/4,
3/2, 2, s1, s2
* s1 or s2 may be selected for slightly stretching octaves.
s1:
s2:
Pitch 1 cent higher than one octave.
Pitch 5 cents higher than one octave.
Pitch
+3
(Octave)
2
-1
1
-1/2
-1/4
0
-1
Middle C (C4)
Tone Parameters
s2
2 3/2 5/4 s1
1
7/8
3/4
5/8
1/2
3/8
1/4
1/8
0
59