Returning To The Factory Settings (Factory Reset) - Roland VR-50HD MK II Reference Manual

Other Features
Returning to the Factory Settings
(Factory Reset)
Here's how you can return the settings of this unit to their factory-set
state. If following the procedures described in this manual does not
cause the result you expect, try executing a factory reset.
NOTE
5 When you execute factory reset, any previously specified
content, any settings saved in memory (p. 33), and the still
image (p. 14) saved in the unit will all be lost.
5 Never turn off the power or remove the USB flash drive while
the message "Processing. " is shown.
1
Press the [MENU] button 0 touch <
<Setup>.
2
> 0 <Factory Reset>.
Touch <
A confirmation message appears.
If you want to cancel the operation, press the [EXIT] button.
3
To perform a factory reset, press the [ENTER] button.
Factory reset is executed.
4
Press the [MENU] button to close the menu screen.
36
> 0 System