USB-PD/QC4.0 Development Kit A NXP Semiconductors Quick Start Guide for USB-PD/QC4.0 Development Kit 2. Safety requirements This kit is to be used in combination with a QC4pDB1532 Portway adapter and a TEA1936xDB1530 demo board. For supplying this application AC power with galvanic isolation from the mains is strongly advised, as the TEA1936xDB1530 demo board is connected to AC power.
USB-PD/QC4.0 Development Kit A NXP Semiconductors Quick Start Guide for USB-PD/QC4.0 Development Kit 3. How to use 3.1 PD 3.0 Type-C tester The PD3DB1548 PD 3.0 Type-C tester is shown in Fig 3. Fig 3. PD3DB1548 PD 3.0 Type-C tester This board is used for PD 3.0 and 4.0(+) evaluation.
Page 4
USB-PD/QC4.0 Development Kit A NXP Semiconductors Quick Start Guide for USB-PD/QC4.0 Development Kit 3.2 Testing the Portway 27 Watt adapter The diagram in Fig 4 shows how the Portway adapter can be tested with the Type-C tester. Fig 3 Fig 4.
Page 5
USB-PD/QC4.0 Development Kit A NXP Semiconductors Quick Start Guide for USB-PD/QC4.0 Development Kit 3.3 Testing the TEA1936xDB1530 demo board The diagram in Fig 5 shows how the TEA1936xDB1530 demo board can be tested with the Type-C tester. Fig 5. Testing the TEA1936xDB1530 demo board Table 2.