Cross Stick - Roland TD-3KW Owner's Manual

USING THE UNIT SAFELY
Attaching the Pad to a Stand
Attach the PDX-8 to a pad mount of the stand.
Be sure to tighten the stand fixing screw securel. If it
remain loose, double triggering may occur.
fig.Stand.e
Tighten
Loosen
Rod
Playing Methods
Head Shots
fig.HeadShot.e
Head
* Do not strike the hoop.
Rim Shots
fig.RimShot.e
Rim
* To play rim shots, strike the rim in the area shown in the
diagram.
6
fig.RimShot.e

Cross Stick

Only strike the rim of the pad.
Depending on the instrument assigned to the rim, you
can play rim shots and/or cross stick sounds.
fig.XStick.e
* To play the cross stick, be sure that you only strike the rim of
the pad. Placing your hand on the head of the pad might
prevent the cross stick sound from being played properly.
For more on settings and tones, see the respective
module's owner's manual.
If you hear a rim sound when you strike the head,
decrease the "Rim Sensitivity (
If you cannot get a rim sound even when you strike
the rim hard, increase the "Rim Sensitivity (
value.
Suitable position
for rim shots
Player
Rim
Rim
)" value.
)"