Connecting To Your Computer Via Usb (Usb Mode); About Usb Functions; Switching Between Storage Mode And Midi Mode - Roland RD-700SX Owner's Manual

Connecting to Your Computer via USB
(USB Mode)

About USB Functions

The USB function used with the RD-700SX features two modes, a
Storage mode used for transferring files, and a MIDI mode used for
MIDI transmissions. Use of these modes requires that the settings be
switched with the RD-700SX, and the two modes cannot be used
simultaneously.
Any switching of the USB mode (Storage mode/MIDI mode)
must be performed before the RD-700SX and computer are
connected.
The following shows the compatibility between operating systems
and modes.
Operating System
Windows XP/2000/Me or later
Windows 98/98SE
Mac OS 9 (9.04 or later)
Mac OS X
* The functions may not work correctly with some computers.
Switching Between Storage
Mode and MIDI Mode
Any switching of the USB mode (Storage mode/MIDI mode)
must be performed before the RD-700SX and computer are
connected.
When switched to USB MIDI mode, the RD-700SX cannot
receive signals through the MIDI IN connector.
1.
Press [EDIT].
2.
Press CURSOR [ ]/[
and then press [ENTER].
3.
Press CURSOR [ ]/[
and then press [ENTER].
The USB Setting screen appears.
fig.06-07g
4.
Press CURSOR [ ]/[
104
Storage Mode MIDI Mode
o o
x o
o o
o o
] to select "5. File Utility/USB,"
] to select "3. USB Setting,"
] to select "USB Mode."
Switching to USB Storage Mode
5.
Use [INC]/[DEC] to select "STORAGE."
A confirmation dialog box appears.
fig.06-07g
6.
To switch the mode, press [ENTER]; to cancel, press [EXIT].
USB Storage mode will be selected.
7.
If you want to save the setting, press [F1 (WRITE)].
For details on operations in USB Storage mode, refer to p. 89.
Switching to MIDI Mode
5.
Use [INC]/[DEC] to select "MIDI."
A confirmation dialog box appears.
fig.06-08g
6.
To switch the USB mode, press [ENTER]. If you decide not
to switch, press [EXIT].
MIDI mode will be selected.
7.
Press CURSOR [ ]/[
Sw."
8.
Use [INC]/[DEC] to select USB-MIDI Thru switch.
This setting determines whether the MIDI signals arriving at the
MIDI IN connector are transmitted without change from the
USB port (ON), or are not transmitted (OFF).
9.
If you want to save settings, press [F1 (Write)].
For details on operations in MIDI mode, refer to "Exchanging
MIDI Messages with Your Computer (MIDI Mode)" (p. 106).
] to select "USB-MIDI Thru