Making The Settings For The Usb Driver - Roland KR107 Owner's Manual

Chapter 10 Connecting External Devices
Connection examples
fig.comp.e
USB Connector
of your Computer
Computer
1.
Turn off the power to the KR107 and the computer.
2.
Start up the computer.
3.
Connect the KR107 and the computer with a USB cable.
4.
Turn on the power to the KR107.
→ Refer to the owner's manual that came with your computer
■ Making the Settings for the
USB Driver
This sets the USB driver used when you have a computer
connected to the USB connector.
1.
Open the Basic screen or press the One Touch [Piano]
button.
2.
Touch the [Option] button.
3.
Touch <USB Driver>.
4.
Touch to select the driver type.
Indication
Select this when using the supplied
driver with a USB connection.
Original
Under ordinary circumstances, use this
mode.
This is an auxiliary mode.
Original 2
It is not normally used.
Select this when using a generic USB
Generic driver included with the OS with a USB
connection.
5.
After changing the settings, turn the power off, then on
again.
166
Bottom left of the KR
USB connector
Description