Making The Settings For The Usb Driver - Roland HPi-7 Owner's Manual

Roland digital piano owner's manual hpi-7, hpi-7le
Hide thumbs Also See for HPi-7:
Table of Contents

Advertisement

Composer Out setting
If you want a performance recorded on the HPi-7 to be transmitted
to an external MIDI device or computer, turn the "Composer Out"
setting "On."
Item
Explanation
Specify whether a recorded
performance will be
Composer Out
transmitted to a MIDI
device.
Program Change setting
Program changes are a type of message that tell a device to "switch
to sound number `x'." A device that receives this message will select
the sound of the corresponding number.
When you use this setting to specify a program change (program
number), that program number will be transmitted to a MIDI device
connected to the HPi-7. A MIDI device that receives the program
number will switch to the sound corresponding to that program
number.
Normally, program changes select from 128 different sounds.
However, some MIDI devices have more than 128 sounds. For such
devices, Bank Select messages are combined with Program Change
messages to select sounds. Bank Select consists of two messages:
MSB (controller number 0; value: 0-127), and LSB (controller number
32; value: 0-127).
*
Some MIDI devices cannot use bank select messages.
Alternatively, some devices may use bank select messages, but
ignore the LSB message.
Item
Explanation
Transmit the bank
Bank Select MSB
select MSB.
Transmit the bank
Bank Select LSB
select LSB.
Transmit the
Program Change
program number.
Making the Settings for the
USB Driver
If you intend to connect to a computer using the USB
connector, you need to make the following setting before you
make the connection.
1
Press the [Function] button.
2
Select "USB Driver," and press the [
Item
Setting
Vendor
USB Driver
Selects the USB
driver type.
Generic
3
Turn on the power once again.
Setting
On, Off
Setting
0 (00h)–127 (7FH)
0 (00h)–127 (7FH)
1 (00h)–128 (7FH)
] button.
Explanation
Select this when using the
supplied driver with a USB
connection.
Select this when using a generic
USB driver included with the OS
with a USB connection.
Connecting External Devices
63

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hpi-7le

Table of Contents