Roland KR107 Owner's Manual page 32

Chapter 1 Performance
❍
Making Detailed Settings for Advanced 3D
1.
Press the [Ambience/Reverb] button and watch the indicator light up.
2.
Touch <Advanced 3D> to display the Advanced 3D screen.
3.
Press the [Option] button.
fig.d-adv3dopt.eps_60
Touch
4.
Touch
Parameter
All Parts
Part
Layer Parts
Auto
Mode
Speaker
Headphone
Depth 1–4
Width 1–128
You can also change the value with the dial.
With "Part," you can touch the icon and then select the value.
5.
When you press the [Exit] button, you return to the Advanced 3D screen.
32
to switch the screens.
for the parameter being set to select the value.
Display
The effect is applied to all tones played with the
keyboard (the lower tone, upper tone, and layer
tone).
The effect is applied only to the layer part.
When not using a layer performance (p. 26), the
Advanced 3D effect is not applied to the keyboard
performance, even if <Keyboard> on the Advance
3D screen is set to On.
This selects settings that are adjusted for use with
headphones when headphones are connected.
When no headphones are connected, settings
adjusted for speakers are selected.
Settings adjusted for listening to sounds through
speakers are selected.
Settings adjusted for listening to sounds through
headphones are selected.
Changes the apparent depth of the sound. The
effect is applied more as the value is increased.
Changes the breadth of the sound.
Explanation