Inserting Blank Measures (Insert); Transposing Individual Parts (Transpose) - Roland KR107 Owner's Manual

■ Inserting Blank Measures
(Insert)
You can add a blank measure at a location you specify. This
addition of a blank measure is called "insertion."
fig.e_insert.e
Ex. To insert measures (bars) 5-7
1 2 3 4 5
1 2 3 4 5
At Step 3 of "Selecting the Editing Function" (p. 122), select
<Insert>.
A screen like the one shown below appears.
fig.d-e-ins.eps_50
Item
Measure number of the first measure of the
From
segment to be inserted
For Number of measures to be inserted
Track button or part number where data will be
inserted
Tr/Pt
When "All" is selected, blank measures are
inserted at the same place in all parts.
6 7
6 7 8 9 10
Content
Chapter 7 Creating and Editing Songs
■ Transposing Individual Parts
(Transpose)
You can transpose specified parts and tracks individually.
At Step 3 of "Selecting the Editing Function" (p. 122), select
<Transpose>.
A screen like the one shown below appears.
fig.d-e-trans.eps_50
Item
Measure number of the first measure of the
From
segment to be transposed
Number of measures to be transposed
For
Track button or part number to be transposed
Tr/Pt
When "All" is selected, the same portion of all
parts is transposed.
The range of transposition
You can select the range to transpose the data,
Bias
from -24 (two octaves down) to +24 (two
octaves up), adjustable in semitones.
* You cannot transpose performances of the drum sets and
sound effect sets (such as the Rhythm Track).
Content
125