Changing The Parts Assigned To The Track Buttons During Smf Playback (Track Assign) - Roland KR107 Owner's Manual

The screen may be switched when you press the button
while the Lyrics screen is displayed. To have the lyrics
displayed again, touch <
screen, or stop playback of the song, then press the
[ (Play/Stop)] button.
■ Changing the Parts Assigned
to the Track Buttons During
SMF Playback (Track Assign)
Normally, when playing back Roland Piano Digital-
compatible SMFs (p. 185), the lower part is assigned to the
[3/Lower] button, and the upper part is assigned to the [4/
Upper] button. However, assignment of the upper and lower
parts may differ with some SMF data.
If you cannot get the upper and lower parts to work well set
on "Auto," then change the setting to "2/1 Part" or "3/4
Part."
This setting is effective with internal songs, registered
songs for favorites, and SMF format song data.
1.
Press the [Menu] button.
The Menu screen appears.
Touch to switch the screens.
2.
Touch <Track Assign>.
A screen like the one shown below appears.
fig.d-trkasgn.eps_60
3.
Touch to select the setting.
Display
The part assigned to each track will be
Auto determined automatically,
depending on the song data.
Part 1 will be assigned to the upper part
track, part 2 to the lower part track, and part
2/1 Part
3 to the user track.
Part 4 will be assigned to the upper part
3/4 Part track, part 3 to the lower part track, and part
1 to the user track.
> on the Piano or Basic
Explanation
Chapter 9 Various Settings
4.
Press the [Exit] button to return to the Menu screen.
After changing this setting, try selecting the song once
again.
For more detailed information about selecting a song,
refer to "Playing a Song" (p. 65).
155