Switching The Remote Sensor On And Off (Ir Function); Calibrating The Touch Screen (Touch Screen) - Roland KR107 Owner's Manual

Chapter 9 Various Settings
Changing the [FUNC1] [FUNC2] Button
Functions
1.
Touch <FUNC1> <FUNC2>
functions to [FUNC1] [FUNC2] button.
Display
Each time the [FUNC 1] or [FUNC 2]
Lyric Color button is pressed, switch the color used
for lyric in the display.
Pressing the button while the song is
playing back stops the playback. When
you release the button, playback resumes
from the beginning of the measure being
Replay played when you pressed the button.
Pressing the button a number of times in
rapid succession moves the playback
position back by the same the number of
measures, after which playback resumes.
Each time the [FUNC 1] or [FUNC 2]
button is pressed, the lower track is
Track 3
switched on or off. When turned off, the
sound from the lower track does not play.
Each time the [FUNC 1] or [FUNC 2]
button is pressed, the upper track is
Track 4
switched on or off. When turned off, the
sound from the upper track does not play.
Displays an enlarged notation.
Zoom
Playback repeats within the marked
Repeat
range.
2.
Press the [Exit] button to return to the Functions screen.
Changing the TEMPO [-] [+] Button and the
TRANSPOSE [-] [+] Button Functions
1.
Touch <TEMPO> or <TRANSPOSE>
assign functions to TEMPO [-] [+] and TANSPOSE [-]
[+] button.
Display
Changes the tempo. Pressing [-] button
slows the tempo down; pressing [+]
Tempo
button speeds up the tempo.
Scrolls the notation in the external display.
Press [-] button to return to the previous
Score Page
page; press [+] button to advance to the
next page.
Transposes the song. Pressing [-] button
lowers the pitch in semitone steps;
Transpose
pressing [+] button raises the pitch in
semitone steps.
150
to assign
Explanation
to
Explanation
Display
Fast forwards and rewinds the song.
When [-] button is pressed, the song
Bwd/Fwd
rewinds; when [+] button is pressed, the
song is fast forwarded.
NOTE
Press the [Exit] button to return to the Functions
screen.
The remote control buttons' original function
assignments are restored when the power is turned off. If you
want to save the changed settings, carry out the memory
backup (p. 148).
■ Switching the Remote Sensor
On and Off (iR function)
You set the Remote Sensor to On (active) or Off (disabled).
When switched on, infrared transmission remote control
information is received.
At step 3 in "Procedure" (p. 142), touch "iR function."
A screen like the one shown below appears.
Touch <ON> or <OFF>
■ Calibrating the Touch Screen
(Touch Screen)
If you've been using the touch screen for some time, the
pointer may be shifted, making the KR react incorrectly. You
should correct this displacement when necessary by
performing calibration (repositioning).
At step 3 in "Procedure" (p. 142), touch "Touch Screen."
A screen like the one shown below appears.
Explanation