Rear Panel; Bottom Panel; Music Rest - Roland HPi-7 Owner's Manual

28
[Marker/Count] button
This is also used for setting the count (p. 21).
These allow you to add and move markers in the notation as
well as repeat playback of song segments simply and easily.

Rear Panel

fig.panelrear
1
1
LCD Out Connector
Connect the cable of the music rest to this connector (p. 9).
2
Pedal connector
Connect the pedal cable of the stand to this connector (p. 9).
3
Input jacks
These jacks can be connected to another sound generating
device or an audio device, so that the sound of that device will
be output from the HPi-7's speakers (p. 61).

Bottom Panel

fig.panelbottom
1 2 3
1
Phones jacks
A set of headphones can be connected here (p. 9).
2
Mic Volume knob
Adjusts the volume level for the microphone.
3
Mic jacks
Used for connecting microphones, so that the sound will be
output from the HPi-7's speakers (p. 56).
4
MIDI Out/In connector
An external MIDI device can be connected here to receive
performance data (p. 61).
5
USB connector
Used for connecting a computer to the HPi-7 using a USB cable
(p. 62).
4 5
29
Disk Drive
You can insert a floppy disk for playing back or saving songs (p.
41, p. 46).
2 3
4
Output jacks
These jacks can be connected to your audio system to enjoy
more powerful sound. They can also be connected to a tape
recorder or similar device in order to record your performance
on a cassette tape (p. 61).

Music Rest

fig.pmrest
1
Display
This screen displays the notation of an internal song or disk
song, and also displays various settings.
* The explanations in this manual include illustrations that depict
what should typically be shown by the display. Note, however,
that your unit may incorporate a newer, enhanced version of the
system (e.g., includes newer sounds), so what you actually see
in the display may not always match what appears in the
manual.
fig.contrast
2
[Contrast] knob
This knob adjusts the contrast of the screen (p. 10).
Panel Descriptions
4
1
2
13