Adding A Count To Assist Your Timing - Roland HPi-7 Owner's Manual

Adding a Count to Assist Your Timing

"Count-in" means to sound a count before song playback begins.
"Countdown" means to sound a count after the end of the song introduction (before you begin playing
the keyboard).
If you will be playing along with a song, sounding a count will make it easier to match the timing of
your performance to the song.
fig.panelcnt
1
Press the [Marker/Count] button.
fig.count1e
Count Mode
Countdown
Sound
Countdown
Track
Count In
Sound
Count In
Measure
Count In
Repeat
Item
Specify what type of count will be
added.
Specify the count-down sound.
Specify the track or part that will
determine the beginning of the
performance when adding a
countdown.
Specify the count-in sound.
Specify the length (number of
measures) of the count-in.
When "Repeat" is turned on in the
Marker setting screen (p. 22), this
specifies whether the count-in will
sound each time the range between
the markers is repeated, or only the
first time.
Playing Along With A Song
Change the setting
Select the item to set
Return to the previous screen
Setting
Count In (add a count before the performance),
Countdown (add a count only before you begin playing),
Count In/down (add both a count-in and a countdown)
Voice (Japanese), Voice (English)
Left & Right Track (Right-hand and left-hand parts of a
piano song)
Left Track (Left-hand part of a piano song)
Right Track Right-hand part of a piano song
(
Part 1-16
Stick, Click, Electronic, Voice (Japanese),
Voice (English), Wood Block, Triangle & Castanets,
Hand Clap, Animal
1, 2
First time,
Each time
1
)
21