Activate Monitoring; Method A: If The Envoy-S Is Associated With A System In Installer Toolkit; Method B: If The Envoy-S Is Not Associated With A System In Installer Toolkit - enphase AC Combiner Box Installation Manual

Activate Monitoring

Register the Envoy-S for monitoring of the Enphase Microinverters in Enlighten
(enlighten.enphaseenergy.com). Once you have registered the system and successfully installed the
Envoy-S, Enlighten sets up an account for the site owner. When you complete the registration and
installation, Enphase sends account information to the site owner so that they can log in to the Enlighten
website and view system performance.

Method A: If the Envoy-S is Associated with a System in Installer Toolkit

a. On your mobile device, go to your Wi-Fi settings and disconnect from the Envoy's AP network. (This
should restore Internet connectivity to your device).
b. Return to the Installer Toolkit app and tap the Sync button on the System Overview screen.
c. Log in to Enlighten and click on the system activation's name from the installer dashboard.
d. From the activation form, open Array
Builder. To see the Array Builder
demo, go to
enphase.com/support/videos.
If you used Installer Toolkit to
•
build arrays and scan
microinverter serial numbers, the
array(s) are built. Make any
necessary adjustments in Array
Builder.
• If you did NOT use Installer
Toolkit to build arrays and scan
microinverter serial numbers,
create the virtual array in Array
Builder using the installation map
as your reference. (You may need
to wait if the microinverters have
not yet reported to Enlighten.)

Method B: If the Envoy-S is NOT associated with a System in Installer Toolkit

a. Log into Enlighten and click Add a New System from the installer dashboard.
b. Enter the System, Installer, Owner, and Location information.
c. Enter the Envoy serial number.
d. Click Save to submit the form.
e. After the microinverters have reported to Enlighten, open Array Builder from the activation form, and
create the virtual array, using the installation map as your reference. To see the Array Builder demo,
go to enphase.com/support/videos.
22 © 2016 Enphase Energy Inc.
AC Combiner Box Installation
141-00030 Rev 02