Instrument Status Indicator Led's - Agilent Technologies Mx3000P Setup And User Manual

Instrument Status Indicator LED's

Appearance of Ready Status
Indicator LED
Continuously lit
Blinking
Off
22
The status indicators on the front of the Mx3000P or Mx3005P instrument
consist of two LED's.
The lower LED is a power status indicator. When this LED is lit, the
instrument is plugged in and powered on.
The upper LED is a
Ready
separate modes, as described in the table below.
Instrument Status
The instrument control software is operational and the unit is ready to run an
experiment.
The unit is not currently available to run an experiment since an experiment is
already in process.
The unit is not currently available to run an experiment. Either the power is off,
the instrument control software is not operational, or the instrument is still
initializing after being powered up.
Mx3000P and Mx3005P QPCR Systems Setup and User's Guide
status indicator for the instrument and has three