Roland JUNO-Di Owner's Manual page 99

37: VS OVERDRIVE
This is an overdrive that provides heavy distortion.
Item Value
SMALL, BUILT-IN,
Amp Type
2-STACK, 3-STACK
Drive
0–127
Level 0–127
38: VS DISTORTION
This is a distortion effect that provides heavy distortion.
Item Value
SMALL, BUILT-IN,
Amp Type
2-STACK, 3-STACK
Drive
0–127
Level
0–127
39: GUITAR AMP SIM
This is an effect that simulates the sound of a guitar amplifier.
Item Value
JC-120,
CLEAN TWIN,
MATCH DRIVE,
BG LEAD, MS1959I,
MS1959II, MS1959I+II,
Amp Type
SLDN LEAD,
METAL 5150,
METAL LEAD,
OD-1,
OD-2 TURBO,
DISTORTION, FUZZ
Amp Gain
LOW, MIDDLE, HIGH
Level
0–127
40: COMPRESSOR
Flattens out high levels and boosts low levels, smoothing out fluctuations
in volume.
Item Value
Threshold
0–127
Level
0–127
Description
Type of guitar amp
SMALL: small amp
BUILT-IN: single-unit type amp
2-STACK: large double stack amp
3-STACK: large triple stack amp
Degree of distortion
Also changes the volume.
Output Level
Description
Type of guitar amp
SMALL: small amp
BUILT-IN: single-unit type amp
2-STACK: large double stack amp
3-STACK: large triple stack amp
Degree of distortion
Also changes the volume.
Output Level
Description
Type of guitar amp
Amount of pre-amp distortion
Output level
Description
Adjusts the volume at which compression
begins
Output level
41: LIMITER
Compresses signals that exceed a specified volume level, preventing
distortion from occurring.
Item Value
Threshold
0–127
Level
0–127
42: GATE
Cuts the reverb's delay according to the volume of the sound sent into
the effect. Use this when you want to create an artificial-sounding
decrease in the reverb's decay.
Item Value
Threshold
0–127
Level
0–127
43: DELAY
This is a stereo delay.
Item Value
0–1300 msec,
Delay Time
note
Feedback
-98–+98%
D100:0W–
Balance
D0:100W
44: LONG DELAY
A delay that provides a long delay time.
This is a monaural delay.
Item Value
Delay Time
0–2600 msec, note
Feedback
-98–+98%
Balance
D100:0W–D0:100W
Effects List
Description
Adjusts the volume at which compression
begins
Output level
Description
Volume level at which the gate begins to close
Output level
Description
Adjusts the time until the delay sound is
heard.
Adjusts the amount of the delay sound that's
fed back into the effect.
Negative (-) settings invert the phase.
Volume balance between the direct sound (D)
and the delay sound (W)
Description
Delay time from when the original
sound is heard to when the delay
sound is heard
Proportion of the delay sound that
is to be returned to the input
(negative values invert the phase)
Volume balance of the original
sound (D) and delay sound (W)
99