Roland JUNO-Di Owner's Manual page 102

Effects List
2VOI PCH SHIFTER
62:
(2VOICE PITCH SHIFTER)
Shifts the pitch of the original sound. This 2-voice pitch shifter has two
pitch shifters, and can add two pitch shifted sounds to the original sound.
Item Value
Pch1 Coarse
-24-+12 semi
Pch2 Coarse
-24-+12 semi
Balance
D100:0W-D0:100W
STEP PCH SHIFTER
63:
(STEP PITCH SHIFTER)
A pitch shifter in which the amount of pitch shift is varied by a 16-step
sequence.
Item Value
Rate
0.05–10.00 Hz, note
Balance
D100:0W–D0:100W
64: REVERB
Adds reverberation to the sound, simulating an acoustic space.
Item Value
ROOM1, ROOM2,
Type
STAGE1, STAGE2,
HALL1, HALL2
Time
0–127
65: GATED REVERB
This is a special type of reverb in which the reverberant sound is cut off
before its natural length.
Item Value
NORMAL, REVERSE,
Type
SWEEP1, SWEEP2
Gate Time
5–500 msec
102
Description
Adjusts the pitch of Pitch Shift 1 in
semitone steps.
Settings of the Pitch Shift 2 sound.
The items are the same as for the
Pitch Shift 1 sound.
Volume balance between the
direct sound (D) and the pitch
shifted sound (W)
Description
Rate at which the 16-step
sequence will cycle
Volume balance of the original
sound (D) and pitch-shifted sound
(W)
Description
Type of reverb
ROOM1: dense reverb with
short decay
ROOM2: sparse reverb with
short decay
STAGE1: reverb with greater
late reverberation
STAGE2: reverb with strong
early reflections
HALL1: reverb with clear
reverberance
HALL2: reverb with rich
reverberance
Time length of reverberation
Description
Type of reverb
NORMAL: conventional gated
reverb
REVERSE: backwards reverb
SWEEP1: the reverberant
sound moves from right to left
SWEEP2: the reverberant
sound moves from left to right
Adjusts the time from when the
reverb is heard until it
disappears.
OD → CHORUS (OVERDRIVE → CHORUS)
66:
Item Value
Overdrive
0–127
Drive
Chorus Rate
0.05–10.00 Hz, note
Chorus Depth
0–127
Level
0–127
OD → FLANGER (OVERDRIVE → FLANGER)
67:
Item Value
Overdrive
0–127
Drive
Flangr Rate
0.05–10.00 Hz, note
Flangr Depth
0–127
Level
0–127
OD → DELAY (OVERDRIVE →DELAY)
68:
Item Value
Overdrive Drive
0–127
Delay Time
0–2600 msec, note
Delay
-98–+98%
Feedback
Level
0–127
DST → CHORUS
69:
(DISTORTION → CHORUS)
Item Value
Dst Drive
0–127
Chorus Rate
0.05–10.00 Hz, note
Chorus Depth
0–127
Level
0–127
DST → FLANGER
70:
(DISTORTION → FLANGER)
Item Value
Dst Drive
0–127
Flangr Rate
0.05–10.00 Hz, note
Flangr Depth
0–127
Level
0–127
Description
Degree of distortion
Also changes the volume.
Frequency of modulation
Depth of modulation
Output Level
Description
Degree of distortion
Also changes the volume.
Frequency of modulation
Depth of modulation
Output Level
Description
Degree of distortion
Also changes the volume.
Adjusts the delay time from the
direct sound until the delay sound
is heard.
Adjusts the proportion of the
delay sound that is fed back into
the effect. Negative (-) settings will
invert the phase.
Output Level
Description
Degree of distortion
Also changes the volume.
Frequency of modulation
Depth of modulation
Output Level
Description
Degree of distortion
Also changes the volume.
Frequency of modulation
Depth of modulation
Output Level