Roland SPD-20 Owner's Manual page 49

Trigger Type rim and head settings are shared for all pads (PD-7/9, PD-120).
MEMO
You cannot make settings for the internal pads. If you try to select the internal head by striking it,
" " is displayed.
4
MEMO
For descriptions of each of the Trigger Types, see p. 45.
5
6
fig. 58
MEMO
In Advanced Edit mode, the SYSTEM Parameter Group indicator flashes.
fig.59
If the TRIG TYPE settings screen does not come up, consequently, you can not call up the Advanced
NOTE
Edit Mode screens by holding down [EDIT].
Using PATCH/VALUE [+] or [-], set the Trigger Type.
If you don't find the settings most suitable for your Trigger Type, then set the type you
think is closest.
Drum Pad:
Kick Pad:
Acoustic Drum Trigger:
Up to this point, the procedure has been the same as in making normal Trigger Type set-
tings.
After setting the Trigger Type, the following operation is used to enter Advanced Edit
mode.
Confirm that Trigger Type (TRIG TYPE) in the SYSTEM parameter
group has been selected.
Hold down [EDIT] for several seconds.
Advanced Edit mode.
(Flashing)
One second after "Scn" appears in the display, the value is then displayed.
About one
second later
This is the Scan Time settings screen.
Pd7, P 1, P 2
Kd7, K 1, K 2
KiK, Snr, toM, FLr
This takes you into
1
2
3
4
5
49