Adjusting The Volume Of The Pedal Hi-Hat Sound (Pdl Level) - Roland SPD-20 Owner's Manual

Total percussion pad
Hide thumbs Also See for SPD-20:
Table of Contents

Advertisement

Pad Bank A
Pad Bank B
INT 1:
Internal pad 1
TRIG 1: Trigger input 1
NOTE
The Velocity Curve (p. 24) and layer (p. 17) settings do not affect the pedal hi-hat sound.
Control the effect applied to an Instrument (EFS)
When this function is assigned, the hi-hat control pedal will control the effect send level of an
Instrument. When the pedal is released, the pad takes the values set for the pad (values set in FX
SEND). When the pedal is depressed, the effect send level will be increased proportionally to the angle
of the pedal.
Control Instrument pitch (U07/U12/U24/d05/d12/d24)
When this function is assigned, the hi-hat control pedal will control the pitch of an Instrument. When
the pedal is released, the pad takes the pitch set for the pad. When the pedal is depressed, the pitch will
be modified proportionally to the angle of the pedal.
Depending on the type of Instrument or on the sound parameter pitch settings, there may be a point
NOTE
above which the pitch cannot be raised.

Adjusting the Volume of the Pedal Hi-Hat Sound (PDL LEVEL)

When one of the Hi-Hat Cymbals for pedal control (H01–H17) sounds is assigned to the pad, you can
control the pedal hi-hat volume when the hi-hat control pedal is pressed. Higher values will result in a
louder sound. At a setting of 0, there will be no sound.
1
2
3
high priority
INT1
INT2
TRIG1
TRIG2
(Head)
(Head)
(Head)
INT1
INT2
TRIG1
TRIG2
(Head)
(Head)
(Head)
U07
up
U12
up
U24
up
down
d05
d12
down
down
d24
In the Edit mode, select the FX/PEDAL parameter group.
Use [
] or [
] to select PDL LEVEL.
Use PATCH/VALUE [-] or [+] to set the volume (0–15).
INT3
INT4
INT5
TRIG3
TRIG4
TRIG1
(Head)
(Rim)
INT3
INT4
INT5
TRIG3
TRIG4
TRIG1
(Head)
(Rim)
700 cents
(a perfect fifth)
1,200 cents
(one octave)
2,400 cents
(two octaves)
500 cents
(a perfect fourth)
1,200 cents
(one octave)
2,400 cents
(two octaves)
INT6
INT7
INT8
TRIG2
TRIG3
TRIG4
(Rim)
(Rim)
(Rim)
INT6
INT7
INT8
TRIG2
TRIG3
TRIG4
(Rim)
(Rim)
(Rim)
low priority
1
2
3
4
5
55

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spd20Spd20x

Table of Contents