Copying A Patch (Copy) - Roland SPD-20 Owner's Manual

Copying a Patch (COPY)

This operation copies Patch settings to another Patch. If you need another Patch that is only slightly dif-
ferent from an existing one, copy that Patch and then make the changes that you need.
fig.29-1
MEMO
When you execute COPY, the contents of the copy destination patch are rewritten.
1
2
3
fig.32
4
Play the pads to check the selected copy source Patch.
MEMO
To quit without copying, press [COPY].
5
fig.32-a
6
The external pad's SOUND parameter, MIDI parameter, and FX/PEDAL settings are copied simulta-
MEMO
neously.
32
Copy source
Patch
User Patch U1-U99
Preset Patch P1-P99
In the Play mode, use PATCH/VALUE [-] or [+] to select the copy des-
tination Patch (1–99).
When you execute COPY, the data is overwritten in this patch.
Press [EDIT] to enter the Edit mode.
Press [COPY].
Use PATCH/VALUE [-] or [+] to select the copy source Patch.
The copy source Patch can be selected from user Patches (U1–U99) or factory-
preset Patches (P1–P99).
Press [ALL/ENTER] and the Patch will be copied.
Press [EDIT] once again to return to the Play mode.
Copy destination
Patch
User Patch U1-U99