How To Edit Effect Parameters - Roland SPD-20 Owner's Manual

How to Edit Effect Parameters

1
2
3
fig.28
4
5
6
7
In the Play mode, use PATCH/VALUE [-] or [+] to select a Patch
(1–99).
Press [EDIT] to enter the Edit mode.
Press [SELECT] to select the FX/PEDAL parameter group (p. 21).
SOUND MIDI
INST TX CH
LEVEL NOTE #
PITCH GT TIME
DECAY PAN
PAN CURVE
CURVE SENS
FX SEND PGM CHG
Press [ ] or [ ] to select the effect parameter you wish to edit.
Use PATCH/VALUE [-] or [+] to set the value.
Repeat steps 3–5 to finish making the effect settings for the Patch.
If you wish to adjust the effect depth independently for each pad,
make the appropriate settings for the FX SEND in the SOUND para-
meter group for each pad (p. 25).
FX/PEDAL SYSTEM
FX TYPE BASIC CH
FX TIME BULK DUMP
FX LEVEL PATCH EXPAND
PDL CTRL TRIG SENS
PDL LEVEL TRIG THRESHOLD
PDL CC # TRIG TYPE
TRIG CURVE
1
2
3
4
5
29