Rear Panel - Planet GSW-1820VHP User Manual

PoE-in-Use Orange
„ Per 1000Mbps SFP Slot
LED Color
LNK/ACT Green

2.2 Rear Panel

The rear panel of the 802.3at PoE+ Switch has an AC power socket (100 to 240V
AC, 50-60Hz, 5A).
Figure 2-3: GSW-1820VHP/GSW-2620VHP Switch Rear Panel
„ AC Power Receptacle
For compatibility with electrical outlet standard in most areas of the world, the
802.3at PoE+ Switch's power supply automatically adjusts to line power in the
range of 100-240V AC and 50/60Hz, 5A.
Plug the female end of the power cord firmly into the receptacle on the rear panel
of the 802.3at PoE+ Switch and the other end into an electrical outlet, and the
power will be ready.
The device is a power-required device, which means it will not
work till it is powered. If your networks should be active all the
time, please consider using UPS (Uninterrupted Power Supply) for
your device. It will prevent you from network data loss or network
downtime. In some areas, installing a surge suppression device
Power
may also help to protect your 802.3at PoE+ Switch from being
Notice
damaged by unregulated surge or current to the Switch or the
power adapter.
Indicates the port is providing 53V DC in-line
Lights
power.
Indicates the connected device is not a PoE
Off
powered device (PD).
Indicates the port is successfully established
Lights
at 1000Mbps.
Indicates that the Switch is actively sending
Blinks
or receiving data over that port.
Function
100~240V AC 50/60Hz, 5A max.
17