Raynet To Rj45 Adapter Cables - Raymarine RVX1000 Installation Instructions Manual

10.5 RayNet to RJ45 adapter cables

Description
1 Adapter cable with a RayNet
(female) socket on one
end, and a waterproof
(female) socket on the
other end accepting the
following cables with an
RJ45 SeaTalk hs
locking (male) plug:
• A62245 (1.5 m).
• A62246 (15 m).
Adapter cable with a RayNet
2
(female) socket on one end,
and a waterproof (female)
RJ45 socket on the other
end, along with a locking
gland for a watertight fit.
3 Adapter cable with a RayNet
(male) plug on one end,
and an RJ45 SeaTalk
waterproof (male) plug on
the other end.
4 Adapter cable with a RayNet
(male) plug on one end, and
an RJ45 SeaTalk
plug on the other end.
102
Typical use
A typical use for this adapter cable is to
connect a DSM300 sonar module to a
LightHouse MFD, using all-waterproof cable
connections. This adapter cable will also
accept the following RJ45 SeaTalk
although the RJ45 plug that connects at the
waterproof equipment end (e.g. DSM300) will NOT be
waterproof:
• E55049 (1.5 m).
• E55050 (5 m).
• E55051 (10 m).
• A62135 (15 m).
• E55052 (20 m).
Directly connect a Raymarine radar scanner
with an RJ45 SeaTalk
a RayNet network switch (e.g. HS5) or
LightHouse MFD.
Connect a legacy G-Series GPM-400, C-Series
Widescreen or E-Series Widescreen MFD to
hs
a Raymarine radar scanner supplied with a
RayNet power / data cable.
Connect a RayNet thermal camera to an
Ethernet network switch with RJ45 ports.
hs (male)
hs cables,
hs (male) cable to
Quantity
1
1
1
1